Greetings from Portsmouth

Please stop by and say hello when you first join. Let us know who you are, where you are and anything else you want to share.

Moderator: British BBQ Society

Pompey Dinlo
Got Wood!
Got Wood!
Posts: 95
Joined: 04 Mar 2014, 21:17
First Name: Jamie
Location: Portsmouth

Greetings from Portsmouth

Post by Pompey Dinlo »

Hello all, I'm new to this forum and a complete virgin in the BBQ / smoking scene however I've recently had some success with curing some hams and my interest in all things cured and smoked has been whetted. My main reason for searching through these forums was to learn a bit more about cold smoking cheese, bacon, sausages etc but then I discovered all these fantastic accounts of ribs, brisket etc that has made me itching to try it out. After some digging around I'm torn between a WSM and a ProQ Frontier, I want to be able to cold smoke and hot smoke but don't want to buy something that does either as an afterthought. Fortunately money isn't too much of an issue so the best performing one is what I'm looking for.

Any advice, opinion gratefully received.
CyderPig
Rubbed and Ready
Rubbed and Ready
Posts: 580
Joined: 01 May 2012, 12:24
First Name: Simon
Location: North Somerset

Re: Greetings from Portsmouth

Post by CyderPig »

Hi and Welcome
If money was not an option I would buy the WSM and a Cold smoke generator, both bases coverd.
Cheers
Si
User avatar
keith157
Moderator
Moderator
Posts: 3816
Joined: 05 Aug 2011, 13:35
First Name: Keith
Location: Stevenage, Herts

Re: Greetings from Portsmouth

Post by keith157 »

Although I own a ProQ Excel I'd have to agree with Simon, the ProQ Cold Smoke generator. If money is no object then the WSM is the better buy, as you were asking about the Frontier I would assume (yes I know what it means ;) ) you would be looking at the 47Cm rather than the bigger version?
Pompey Dinlo
Got Wood!
Got Wood!
Posts: 95
Joined: 04 Mar 2014, 21:17
First Name: Jamie
Location: Portsmouth

Re: Greetings from Portsmouth

Post by Pompey Dinlo »

Thanks for the replies. Am I to assume that the ProQ smoke generator simply sits at the bottom of the smoker and therefore can fit into the bottom of the WSM?

Can I hang food in the WSM? With the ProQ there are fish hooks for hanging fish and meat and whilst I'm no fisherman I do intend on making plenty of polish sausage which I would imagine would probably smoke better if it was hanging.
ConorD
Rubbed and Ready
Rubbed and Ready
Posts: 590
Joined: 19 Apr 2012, 18:50
First Name: Conor Doyle
Location: Wokingham, Berks

Re: Greetings from Portsmouth

Post by ConorD »

WSM is the best investment I have made, although haven't cold smoked yet and would probably get a separate cold smoker to do that as the WSM is built to hold a decent bbq temps (even with small amounts of coal) and not the 70-80 degrees required for cold smoking. Check out this page as a means to convert but seems like a lot of fuss to me when you can just buy a separate unit.

http://www.virtualweberbullet.com/coldsmoker.html
robgunby
Rubbed and Ready
Rubbed and Ready
Posts: 614
Joined: 30 Aug 2012, 17:01
First Name: Rob
Location: Sheffield

Re: Greetings from Portsmouth

Post by robgunby »

Have you considered a Bradley smoker? I don't like the idea of puck based machines personally, but if money is no object, a large Bradley will do hot or cold smoking, can be set up and left to do its thing and forgot about until the food is ready. I've never used one, but I've read a lot about them, and would have one if I could live with the expense of buying the wood pucks. The smokers themselves seem rather good value.
Pompey Dinlo
Got Wood!
Got Wood!
Posts: 95
Joined: 04 Mar 2014, 21:17
First Name: Jamie
Location: Portsmouth

Re: Greetings from Portsmouth

Post by Pompey Dinlo »

robgunby wrote:Have you considered a Bradley smoker? I don't like the idea of puck based machines personally, but if money is no object, a large Bradley will do hot or cold smoking, can be set up and left to do its thing and forgot about until the food is ready. I've never used one, but I've read a lot about them, and would have one if I could live with the expense of buying the wood pucks. The smokers themselves seem rather good value.
I did have a brief look at the Bradley but I wasn't too keen on the idea of being restricted to their wood pucks plus I'm a bit short on storage and they didn't look particularly suited to outdoor storage in the way that the WSM or ProQ do.
Pompey Dinlo
Got Wood!
Got Wood!
Posts: 95
Joined: 04 Mar 2014, 21:17
First Name: Jamie
Location: Portsmouth

Re: Greetings from Portsmouth

Post by Pompey Dinlo »

ConorD wrote:WSM is the best investment I have made, although haven't cold smoked yet and would probably get a separate cold smoker to do that as the WSM is built to hold a decent bbq temps (even with small amounts of coal) and not the 70-80 degrees required for cold smoking. Check out this page as a means to convert but seems like a lot of fuss to me when you can just buy a separate unit.

http://www.virtualweberbullet.com/coldsmoker.html
Would buying the ProQ smoker eliminate the problem of high temperatures with the WSM? I'm imagining smouldering sawdust doesn't generate much in the way of heat.
User avatar
Pooky
Got Wood!
Got Wood!
Posts: 98
Joined: 25 Mar 2012, 16:24
First Name: Tom Pook
Location: Sussex

Re: Greetings from Portsmouth

Post by Pooky »

You shouldn't have any problem with heat using the ProQ generator in a WSM - As you say, the smouldering dust generates minimal heat - Certainly not enough to fill that space.

Loving the name by the way - Still use the term Dinlo on a regular basis!
CyderPig
Rubbed and Ready
Rubbed and Ready
Posts: 580
Joined: 01 May 2012, 12:24
First Name: Simon
Location: North Somerset

Re: Greetings from Portsmouth

Post by CyderPig »

Hi
No problem using the Pro Q in a smoker like the WSM, still plenty of room to set up hooks and hang fish fillets or sausage if you wish by removing 2nd grate and water pan.
Hope this helps

Si
Post Reply