Getting sawdust to light in ProQ smoke generator

Feel free to ask any questions, one of the experts will certainly respond, don't be afraid to ask anything, we were all beginners at some point.
Post Reply
PeteW
Got Wood!
Got Wood!
Posts: 44
Joined: 18 Feb 2013, 12:49
First Name: Pete Williams

Getting sawdust to light in ProQ smoke generator

Post by PeteW »

Hi,

I recently bought the ProQ cold smoker generator, and got on with in fine on my first attempt with the supplied sawdust. I'm now having a go using some oak sawdust I've acquired locally but it doesn't seem to want to light. Any tips for getting it to light? I wonder if maybe it's too course and I need to blitz it up in the food processor to make it finer? I've tried microwaving it for 30 seconds or so until it steamed a bit to make sure it's suitably dry. Any other tips?

Cheers

PETE
User avatar
keith157
Moderator
Moderator
Posts: 3816
Joined: 05 Aug 2011, 13:35
First Name: Keith
Location: Stevenage, Herts

Re: Getting sawdust to light in ProQ smoke generator

Post by keith157 »

PeteW wrote:Hi,

I recently bought the ProQ cold smoker generator, and got on with in fine on my first attempt with the supplied sawdust. I'm now having a go using some oak sawdust I've acquired locally but it doesn't seem to want to light. Any tips for getting it to light? I wonder if maybe it's too course and I need to blitz it up in the food processor to make it finer? I've tried microwaving it for 30 seconds or so until it steamed a bit to make sure it's suitably dry. Any other tips?

Cheers

PETE
Hope no-one else wants to use the food processer..... ;)

I would think you were on the right track with drying it out, maybe spreading it thinly on a baking sheet in a warmish oven could dry it better than a microwave. Not having tried it myself, maybe the reason they sell the replacement dust is it's difficulty to DIY it. What type of wood did the sawdust come from, hopefully not a softwood ?
User avatar
KamadoSimon
Rubbed and Ready
Rubbed and Ready
Posts: 527
Joined: 25 Mar 2012, 14:00
First Name: Simon Godfrey
Location: Berkshire

Re: Getting sawdust to light in ProQ smoke generator

Post by KamadoSimon »

Drying it out is a good idea - but even with the really fine stuff that you get from ProQ, it can sometimes be a little begger to light. But probably worth blitzing the oak chips in a processor if you still can't light it.
User avatar
keith157
Moderator
Moderator
Posts: 3816
Joined: 05 Aug 2011, 13:35
First Name: Keith
Location: Stevenage, Herts

Re: Getting sawdust to light in ProQ smoke generator

Post by keith157 »

KamadoSimon wrote:Drying it out is a good idea - but even with the really fine stuff that you get from ProQ, it can sometimes be a little begger to light. But probably worth blitzing the oak chips in a processor if you still can't light it.
There speaks a man with two processors, or an understanding spouse :lol:
User avatar
KamadoSimon
Rubbed and Ready
Rubbed and Ready
Posts: 527
Joined: 25 Mar 2012, 14:00
First Name: Simon Godfrey
Location: Berkshire

Re: Getting sawdust to light in ProQ smoke generator

Post by KamadoSimon »

lol

I would wash it out. And possibly conduct said exercise whilst my better half is reliably out of the house.....
User avatar
keith157
Moderator
Moderator
Posts: 3816
Joined: 05 Aug 2011, 13:35
First Name: Keith
Location: Stevenage, Herts

Re: Getting sawdust to light in ProQ smoke generator

Post by keith157 »

Wise words KS wise words 8-)
oldreliable
Still Raw Inside
Still Raw Inside
Posts: 1
Joined: 24 Apr 2013, 15:00
First Name: tom mateu

Re: Getting sawdust to light in ProQ smoke generator

Post by oldreliable »

I use a kitchen blow torch and just give it a little blow until it's smoldering like a cigar. Works a treat every time.
Post Reply